This type of wire cloths have slotted openings to achieve a higher percentage of open area for a higher separating efficiency.
It is suited for screening such objects as fertilizers that tend to cause plugging.
For smaller opening sizes, round wires are combined with flat wires in Oblong Openings style for a higher stability.
The ratio of widthwise and lengthwise dimensions of an opening is generally 1:3.
| Oblong Openings with round and flat wires | Oblong Openings with round wires |
|---|---|
 |
 |
Stainless steel, hard steel, galvanized steel, etc.
Please note:
Because of the slotted openings, the screening efficiency and service life of the product come to be different depending on the direction of the flow of objects to be processed and the orientation of the openings as shown in figures below. Please consult.
<Please check the texts in these drawings.>
| Combination of Openings and Wire Diameters | ||||||
| Opening mm |
Wire Diameter mm |
Long Side mm |
Opening mm |
Wire Diameter mm |
Long Side mm |
|
| 30 | φ2.5 - φ12 | 35 - 100 | 5 | φ1.2 - φ3 | 6 - 50 | |
| 20 | φ2.5 - φ10 | 25 - 100 | 4 | φ1.2 - φ3 | 6 - 50 | |
| 15 | φ2 - φ6 | 20 - 100 | 3.5 | φ2 | 10 | |
| 12 | φ1.5 - φ5 | 15 - 70 | 3 | φ1 - φ2 | 5 - 25 | |
| 10 | φ1.2 - φ5 | 15 - 70 | 2.5 | φ1.6 | 8 | |
| 9 | φ1.2 - φ5 | 15 - 70 | 2 | φ1 - φ1.2 | 4 - 20 | |
| 8 | φ1.2 - φ5 | 10 - 70 | 1.5 | φ1.2 | 5.5 | |
| 7 | φ1.2 - φ4 | 10 - 70 | 1.2 | φ1 | 4.5 | |
| 6 | φ1.2 - φ4 | 8 - 70 | ||||
●Flat top wire cloth with slotted openings can be also produced.
－Flat Top Wire Cloths with Oblong Openings
Click on image to enlarge.* The images are different in size from the real products.
| Oblong Openings | ||
|---|---|---|
 |
 |
 |
| Slotted Openings Flat Top Type Φ3×(8×20) mm opening |
Slotted Openings Plain Weave Type Φ3×(8×15) mm opening |
Oblong Openings Φ2.5×5/25 mm opening |
|
|
|
| Slotted Openings Crimp Type Φ3×(8×20) mm opening |
Slotted Openings with Round and Flat Wires Φ3×(t2×w6)×(3×20) mm opening |
|
订购
咨询栏